How To Remove a Tree Stump Without a Grinder

Exposing tree roots to cut them and remove the stump

Avoid spending hundreds of dollars hiring a firm or renting a grinder to remove your tree stump. By knowing how to safely remove a tree stump, you can regain your landscape and save money.

72tree.com assembled the following information on methods for removing a tree stump without a grinder and crucial safety measures to observe.

Manual Tree Stump Removal

You can remove small and medium-sized stumps yourself with a few tools, some ingenuity, and muscle. When it comes to more massive stumps, you may want to get the help of a friend or relative to speed up the job and help with the heavy lifting.

Project Time: Manually removing your stump could take as little as 4 hours or up to 12, hours depending on the root ball’s number of roots and depth.

Removal Time: 4 to 12 hours

Tools, Protective Gear, and Costs:

•A sturdy and sharp shovel $15 to $35

•A mattock (similar to a pick-ax) $20 to $30

•An ax $25 to $45

•A steel 17Lb+ digging bar $30 to $40

•A bow saw $12 to $50

•Sturdy steel-toed boots $50 to $100

•Well-fitting work gloves $5 to $25

Using an ax to sever roots from a tree stump and reduce its mass

Your work gloves should snugly fit your hands. Loose gloves will move around, rub the skin, and cause blisters (defeating the purpose of wearing them).

Removing The Stump

1. Use the mattock, digging bar, and shovel to clear as much of the soil from around the stump and roots. Dig deep and wide to gain access to as many of the roots as possible. The larger the stump, the more soil you will need to remove.

2. Use the bow saw, mattock, and an ax to chop your way through the roots. When wielding an ax, take care to avoid over-chopping into the soil; this will quickly dull the blade.

3. As you cut roots away from the stump, cut them a second time to remove them from your work area.

4. Work your way around and under the root ball. Some species will grow a taproot, and this root will require some effort to sever. The more mature the tree, the more substantial the taproot will be. Dig deep and wide to gain as much access to this root as possible.

5. Once the stump is free, drag it out of the hole and fill in the void. (it will take more soil to fill in the hole than you removed from it).

Note: If you are not comfortable or knowledgeable using an ax, DO NOT use one. This tool can inflict severe harm if misused, use your mattock and/or bow saw in its place.

Tip: You can save a lot of time using a pressure washer to clear soil away from roots. Do this in sections and let the excess water soak into the ground. You can also dig a trench to guide water and soil away from your work area as you blast through the soil.

Chemical Tree Stump Removal

Just because there is no trunk or canopy, your stump may still be alive. Other trees in close proximity may be sharing water and sugars through their root systems, or your stump’s roots may have enough stored water and nutrients to attempt a comeback.

If multiple trees are connected by roots, the use of harsh chemicals on your stump may have adverse effects on the trees helping it to stay alive. Read more about killing tree stumps at 72tree.com/how-to-kill-stop-tree-stumps-growing-back/

You can remove medium and large-sized stumps chemically. While this process is much slower than manually removing the stump, it will save you from digging up your yard.

Project Time: Your stump’s height and diameter are determining factors for this project. It can be done in 1 hour and last as much as 4 hours.

Removal Time: 6 months to 1 year

Tools, Protective Gear, and Costs:

•A chainsaw (if you need to lower the height of the stump) $60 to $250

•A bow saw $12 to $50

•A drill and large boring bit (use the largest bit you can find) $70 to $200

•Plastic tarp $4 to $18

•Potassium-nitrate stump remover granules or high-nitrogen fertilizer $15 to $25

•Organic mulch $15 to $25 (free if you compost)

•Sturdy steel-toed boots (if using a chainsaw) $50 to $100

•Well-fitting work gloves $5 to $25

Using a chainsaw to reduce the height of a tree stump before removal

A note about the removal time: This process relies on the breaking down of organic matter and relies on warmth and moisture. In cooler climates, removal time may exceed 1 year while in warmer climates, this time may be less than 6 months.

Removing The Stump

1. Use your chainsaw or bow saw to lower the height of the stump. The lower to the ground, the more efficient this process will be.

2. Dill several deep holes in the stump. Use the widest bit available to you and drill the holes close together.

3. Fill each hole with water and your remover granules or fertilizer (don’t be shy, pour it in).

4. Use a soaker hose to saturate the soil surrounding the stump and apply a 3 to 6-inch layer of organic mulch over and around the stump.

5. Cover the stump and mulched area with a tarp to further retain the moisture.

6. Secure the tarp by staking it, covering it with a thick layer of organic mulch, and placing heavy objects (rocks and/or potted plants) on it.

7. Every 2 to 3 weeks, remove the tarp, repeat steps 3 and 4, and replace the tarp.

Under optimal conditions, the stump may soften within 3 to 4 months. It can then be broken up with an ax, retreated, and completely buried to further decay underground.

Note: Protect yourself with gloves, protective glasses, and clothing when using or dispersing chemicals. Wash your hands and any exposed body parts thoroughly after completing this job.

Tip: When having a tree removed, request that the tree be cut as close to the ground as possible. By doing this, you will save a lot of time when chemically removing your stump.

Caution: While other, more caustic agents like muriatic acid can be used to chemically remove a stump, they bring severe health hazards with them. Many acids do not require physical contact to cause harm, inhaling their vapors can cause significant respiratory damage. Avoid using such chemicals to preserve the health of your loved ones and surrounding wildlife.

Tree Stump Removal by Fire

You can remove medium and large-sized stumps by burning them. Before embarking on this method, verify that there are no municipal restrictions or forbiddance by HOA rules on burning out tree stumps.

Project Time: Depending on the freshness of your stump, this project can be done in 1 hour and last as much as 2 hours.

Removal Time: 1 day

Tools, Protective Gear, and Costs:

•A drill and large boring bit (use the largest bit you can find) $70 to $200

•A sturdy and sharp shovel $15 to $35

•Kerosine $2.70 to $3.30 per gallon (pricing varies with fuel market values)

The more time your tree stump has had to dry out, the more effective this method will be. However, stump removal by fire can be used at any time.

1. Start by digging a trench around your stump 4 to 6-inches deep and 10 to 12-inches wide. This will remove grass and debris that might ignite.

2. Drill several holes as wide and as deep as you can into the stump, the more, the better. Using a hammer and chisel, bore out a deep hole 3 to 4-inches wide in the center of the stump.

3. Pour kerosine into all of the holes and let the stump soak it up. Repeat this step several (3 to 4) times before lighting the stump on fire.

4. When you are ready to light the stump, apply kerosine once more. The larger, center hole should be wet with kerosene and filled with charcoal to intensify the heat. Ignite the stump from a safe distance.

5. Let the stump burn completely before disturbing it.

6. Anything left after this method should be easily broken apart and buried where the stump once was.

Tree stump removal by fire completely burning it

Tip: Keep a fire extinguisher and water hose close by when burning a stump. If winds pick up, embers may be blown to surrounding structures, use the hose to extinguish the embers.

Caution: Kerosine floats on water. If you must extinguish the fire, use a fire extinguisher on the stump. The use of water may carry lit kerosine spraying in all directions.

Tree Stump Removal

Along with the options presented in this article, come specific hazards that should be addressed when attempting to remove a tree stump. If, at any juncture, you feel that you cannot safely remove your tree stump, stop what you are doing, and call a professional tree service to remove the stump for you.

How To Remove a Tree Stump

In this article, you discovered multiple methods for removing a tree stump without using a stump grinder and crucial tips to speed up the job and keep you safe.

By following some simple instructions and properly using your tools, you can remove your tree stump without the cost or mess of using a stump grinder.

Improperly trying to remove a tree stump may result in catastrophic physical injuries leading to costly medical bills and health consequences.

Sources:
extension.sdstate.edu/how-remove-stump
extension.illinois.edu/blogs/rhonda-ferrees-ilriverhort/2014-06-20-removing-tree-stumps
warnell.uga.edu/sites/default/files/publications/Stump%20Removal%20pub_14-8.pdf